Technical parameters and machining capacity:
Model
|
TKC-15
|
TKC-25
|
TKC-40
|
Weight of falling parts(kg)
|
15
|
25
|
40
|
Maximum blow energy(kj)
|
0.16
|
0.27
|
0.53
|
Number of blows per minute(min-1)
|
245
|
250
|
245
|
Maximum square steel can be forged(mm)
|
30×30
|
40×40
|
52×52
|
Maximum round steel can be forged(Diameter)(mm)
|
φ35
|
φ48
|
φ68
|
Rate power of motor(kw)
|
2.2
|
3
|
4
|
Total weight of the hammer(kg)
|
270
|
720
|
860
|
External size(mm)
|
700×450×980
|
1100×500×1300
|
1400×600×1500
|
Tags
External size(mm) 700×450×980 1100×500×1300 1400×600×1500
Description
Our CNC fully hydraulic die forging hammer is equipped with on-line electronic monitors for pressure, temperature and cleanness and CNC energy control. The electronic monitors are used to guarantee normal operation of the hydraulic system. With precise striking energy control, our hydraulic forging press can not only reduce vibration and noise generated by excess striking energy, but also increase the hammer’s operational reliability and service life of dies as well as improve forging parts’ quality and speed up working efficiency.
Features
1. This CNC fully hydraulic die forging hammer adopts fully hydraulic driving system to avoid oil and steam air crossing;
2. Highly integrated hydraulic control system, and the accumulator is fixed directly on the main valve block with no need of pipe connection. This can improve efficiency of the hydraulic system and facilitate maintenance of equipment;
3. Slow up and down in the case of releasing hydraulic system pressure, safer to operate;
4. Cone valve structure of priority valves and main valves allows fast response speed, excellent sealing performance and no internal leakage of this hydraulic forging press;
5. Advanced high and low pressure double sealing structure of this hydraulic forging press helps to avoid oil leakage;
6. Special swayable oil cylinder and piston rods guiding structure, suitable for off-center forging and extending service life of hammer rod;
7. This CNC fully hydraulic die forging hammer uses U-frame casting steel and radial wide guide rails to attain stable performance and high accuracy of ram;